Filling The Fuel Tank - EMAK EF 92S/13H Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 221

3.4.3 FILLING THE FUEL TANK

For safety reasons, the mower is transported without fuel, and it is necessary to fill the tank before
starting up for the first time. The fuel tank is located under the front hood and has a capacity of 7.5 l
of fuel.
- Use only fuel of the octane rating designated in the engine manual. Defects caused by
improper fuel are not covered by the warranty!
- Fill the tank only when the engine is switched off and is cool. Fill the tank in a well-ventilated
area.
- When handling fuel, do not eat, smoke or use an open flame.
- For filling the tank, use a funnel intended for use with fuel.
- Make sure not to spill any fuel when filling the tank. Spilled fuel is highly flammable. If any
fuel spills, wipe it up until dry.
- Store fuel out of the reach of children.
Filling process:
Remove the fuel tank cap. Open it slowly, because the tank may contain
pressurized petrol fumes.
Insert the funnel into the filling port and pour in fuel from a canister.
After filling the tank, always wipe dry the cap and the area around it. It is
appropriate to check the fuel level through the lines.
We also recommend cleaning the tank itself regularly, because any
contaminants in the fuel can cause engine breakdown.
3.4.4 CHECKING TYRE PRESSURE
Before using the machine, check the air pressure in the tyres.
The air pressure in the front and rear tyres must be within the range
of 80 -140 kPa. The difference between the individual tyres can be
± 10 KPa.
Do not exceed the maximum pressure marked on the tyres that are being used.
31
Tabla de contenido
loading

Este manual también es adecuado para:

Ef 92s/16hOm 92s/13hOm 92s/16hBlizzard 92/13h

Tabla de contenido