Becken BBIC2341 Manual De Instrucciones página 6

7. Refit the upper door and then the upper hinge
on the left side. Ensure the upper door is aligned
horizontally and vertically, so that the seals close on
all sides before finally tightening the upper hinge. If
necessary, use a spanner to tighten the hinge.
Kits for installation
Guide x 4 Guide Cover x 4
Short Screw x 27 Long Screw x 27
Installing the appliance
1. Ensure that the size of the cabinet and ventilation are adequate.
2. Slowly and carefully push the appliance into the
cabinet. Ensure that the side of the opening is as
close to the cabinet wall as possible.
10
Slider x 4 Slider Cover x 4
Rubber Seal x 1 Middle Bracket
Cover x 1
3. Screw a guide to the holes in the side of appliance
door with short screws. Insert the slider into the guide,
then fully open and close the appliance door and
cabinet door to check that the cabinet door can close
fully and smoothly.
4. Open the appliance door and cabinet door together
and mark the position of the slider when the slider
can function well at all angles during door opening
and closing. Take the slider out of the guide and fix the
slider to the cabinet door with two short screws. Then
fix the slider cover onto the slider.
5. Unscrew the guide from appliance door.
6. Repeat step 2 to 5 to fix the other three sliders and covers.
7. Fit four guides with sliders and attach them with
short screws.
Then fit the guide covers onto the guides.
8. Double check that the door can open and close
smoothly and that the appliance is sealing properly.
If not, slightly adjust the unit. Then fix the bottom
bracket to the wooden cabinet with 2 long screws.
9. Fix the top bracket to the wooden cabinet with
short screws.
Refrigerator Combi Built-In | Frigorífico Combi Integrable | Frigorífico Combinado Encastrável
EN
11