Kohler K-10673 Guía De Mantenimiento página 13

Clean the Screen/Replace the Piston (cont.)
Insert the piston into the valve body.
Insert the piston cover with attached solenoid into the valve body.
Place the O-ring on top of the piston cover.
NOTE: If the retaining nut is not fully tightened, the valve will run
continuously.
Thread the large retaining nut into the valve body, then securely
wrench tighten.
Connect the DC sensor connector to the solenoid connector.
Place the cap on the valve body, then secure with the setscrew.
Open the control stop valve.
Verify the valve functions.
Kohler Co.
All manuals and user guides at all-guides.com
13 1108709-5-C