Hitachi 24HE2101 Manual De Inicio Rápido página 14

for Android OS devices and can only be used via
YouTube and Net ix applications.
In order to use this feature the TV and the remote
device should be connected at least once while the TV
is on. If the TV is powered off, the connection should be
reestablished, the next time it is switched on. Otherwise
this feature will be unavailable. This does not apply, when
the TV is switched into the standby mode.
The performance of some devices in the market, may
vary due to the software architecture. In order to use
Wake On feature with a better performance, please
make sure that your device has latest rmware version.
Wireless Display (depending on the model)
Wireless Display is a standard for streaming video and
sound content by Wi-Fi Alliance. This feature provides
the ability to use your TV as wireless display device.
Using with mobile devices
There are different standards which enable sharing of
screens including graphical, video and audio content
between your mobile device and TV.
Plug the wireless USB dongle to TV rst, if the TV
doesn't have internal WiFi feature.
Then press the Source button on the remote and
switch to Wireless Display source.
A screen appears stating that the TV is ready for
connection.
Open the sharing application on your mobile device.
These applications are named differently for each
brand, please refer to the instruction manual of your
mobile device for detailed information.
Scan for devices. After you select your TV and connect,
the screen of your device will be displayed on your TV.
Note: his feature can be used onl if the mobile
device supports this feature. Scanning and connecting
processes differ according to the programme ou
use. Android based mobile devices should have the
software version . . and above.
Connecting Other Wireless Devices
(depending
on the model)
Your TV supports another short range wireless
connection technology too. A pairing is required before
using these kind of wireless devices with the TV set.
You should do the followings to pair your device with
the TV:
Set the device to pairing mode
Start device discovery on the TV
Note: efer to the user manual of the wireless device
to learn how to set the device to pairing mode.
You can connect audio devices or remote controllers
wirelessly to your TV. Unplug or switch off any other
connected audio device in order for wireless connection
feature to work correctly. For audio devices you should
use the Audio Link option in the System>Sound menu,
for remote controllers the Smart Remote option in the
System>Settings>More menu. Select the menu option
and press the OK button to open the related menu. Using
this menu you can discover and connect the devices
that use the same wireless technology and start to use
them. Follow the on-screen instructions. Start the device
discovery. A list of available wireless devices will be
displayed. Select the device you want to connect from
the list and press the OK button to connect. If "Device
connected" message is displayed, the connection is
successfully established. If the connection fails try it
again.
Image transfer and audio streaming
You can also use this type of connection to transfer
images or stream audio from your mobile device to
your TV.
Pair the mobile device and the TV as described before.
Start a device search in your hand-held device. Select
your TV from listed devices. Con rm the request for
connection on your TV screen and do the same on
your hand held device screen. If no pairing is done,
image transfer or audio streaming to the TV will not
be possible.
The images sent by mobile device will be displayed
on the TV without con rmation request, if the image
le is suitable. You can also save the image le to a
connected USB memory drive or set as boot logo, if
this feature is supported and the le is suitable. Press
the Exit button to terminate displaying the image.
The audio will be routed through the speakers of
the TV, after con rmation is given. To start audio
streaming unpair the device from your TV if it is paired
with your TV previously. After pairing is completed,
a con rmation message will be displayed asking
whether you want to start audio streaming from your
mobile device. Select Yes and press the OK button on
the remote of the TV. If the connection is succeeded,
all audio will be routed through the speakers of the
TV. A symbol will appear on the upper side of the TV
screen as long as the audio streaming connection is
active. To terminate the audio streaming, you should
turn off the wireless connection of your mobile device.
Close all running applications and all the menus on
the TV for a trouble-free transfer. Only image les
with sizes smaller than 5 MB and in the following le
formats are suitable; . pg . peg .png bmp. If a le sent
by the mobile device does not suit these requirements,
it will not be displayed on the TV.
Note: Wireless devices ma operate within the same
radio frequenc range and ma interfere with one
another. o improve the performance of our wireless
device place it at least meter awa from an other
wireless devices.
English - 22 -
Internet Portal
Portal feature adds your TV a feature that allows you
to connect to a server on the Internet and view the
content provided by this server over your Internet
connection. Portal feature allows you to view the
music, video, clip or web content with defined
shortcuts. Whether you can view this content without
interruption depends on the connection speed
provided by your internet service provider.
Press "Internet" button on the remote to open internet
portal page. You will see icons of the available
applications and services on the portal screen. Use
the navigaiton buttons on your remote to select the
desired one. You may view the desired content by
pressing OK after selecting. Press BACK/RETURN
button to return back to the previous screen or E IT
to quit internet portal mode
Note Possible application dependent problems ma
be caused b the content service provider.
Portal service content and the interface ma be
changed at an time without prior notice.
Open Browser (depending on the model)
Open Browser function is one of the applications on
the portal that provides access to internet. Select the
internet browser logo on the portal page and press
OK to launch the browser. Logos of certain prede ned
websites will be displayed. You can select one of them
for quick access or enter the URL-address of a website
in the address bar on the top of the screen. To perform
searches on the internet enter a keyword in the adress
dialog box and move the cursor to search icon using
the navigation buttons on the remote and press OK
HBBTV System
(depending on the model)
HbbTV (Hybrid Broadcast Broadband TV) is a standard
that seamlessly combines TV services delivered via
broadcast with services delivered via broadband
and also enables access to Internet only services for
consumers using connected TV's. Services delivered
through HbbTV include traditional broadcast TV
channels, catch-up services, video-on-demand, EPG,
interactive advertising, personalisation, voting, games,
social networking and other multimedia applications.
HbbTV applications are available on channels where
they are signalled by the broadcaster. The applications
are generally launched with a small red button icon
to notify the user that there is an HbbTV application
on that channel. The user then should press the red
button to open the application page. To close the
application press the red button again. It should be
noted that the operation and control of the applications
may differ depending on the application.
Smart Center (depending on the model)
Smart Center is a mobile application running on iOS
and Android platforms. With your tablet or phone,
you can easily stream your favourite live shows and
programmes from your smart TV using its FollowMe
TV technology. Also; you can launch your portal
applications, use your tablet as a remote control for
your TV and share media les.
To use Smart Center features, connections have to be
done properly. Make sure the TV and mobile device
are connected to the same network.
For media sharing feature Audio Video Sharing
option in the System>Options>More menu of your
TV should be enabled.
Download the appropriate Smart Center application
onto your mobile device from the application store on
the web and launch it to start to use.
Note: eing able to use all functions of this application
depends on the features of our
English - 23 -
.