Reggiani SUPERTECHNE Instrucciones De Montaje página 13

LUMINAIRES FOR METAL HALIDE AND SODIUM VAPOUR LAMPS
To connect to the mains power supply (see
General Notes), use the three-pole terminal
block with quick-fit plug provided.
When wiring has been completed, before fixing the luminaire to the false ceiling, the
terminal board brackets must be mounted in position
keeping the toothed washer in position
Importan : the control gear must be placed at the side of the luminaire at the maximum
distance allowed by the electrical wiring.
; fully tighten the support screw,
.
BIS
After wiring, fix the luminaire to the false ceiling as shown in the figure below.
1' 2'
INSERIRE IL PROIETTORE ABBASSARE CON LE MANI
NEL FORO D'INCASSO L'ASTINA IN METALLO PER
ANCORARE MOLLABLOK
ACCESSORIES
ANTI-GLARE LOUVRE ref. 6923
Place the louvre in front of the glass retention
ring, insert the four tabs on the external
circumference of the louvre into the
corresponding slots in the ring, press and
turn.
13
3' 4'
REINSERIRE ALL'INTERNO PER SMONTARE
L'ASTINA IN L'APPARECCHIO
METALLO FLESSIBILE NON APRIRE L'OBLÒ MA
SBLOCCARE LA MOLLA
CON UN CACCIAVITE
INSERENDOLO
VERTICALMENTE
E N G L I S H