Handling And Use; System Requirements; Connecting The Loudspeaker; Switching On/Off And Adjusting The Volume - Silvercrest SLB 1.2 D2 Instrucciones De Uso

Handling and use

This section provides you with important information on handling and
using the device.

System requirements

▯ Computer with sound card and USB connection
or
▯ audio device with audio output (3.5 mm jack plug) and USB
connection (alternatively with external USB power supply).

Connecting the loudspeaker

♦ Ensure that the rotary switch
♦ Plug the 3.5 mm jack plug
socket of your audio device (e.g. notebook, MP3 player).
The audio signals are transmitted via this connection.
♦ Plug the USB plug
(alternatively into the USB socket of an external USB power
supply). The mains adapter should have the following speci-
fications: 5 V
loudspeaker
NOTE
► The loudspeakers
Switching on/off and adjusting the volume
♦ Turn the rotary switch
order to switch the loudspeakers
♦ Turn the rotary switch
increase the volume.
♦ Turn the rotary switch
♦ Turn the rotary switch
(OFF position) in order to switch the loudspeakers
Switching the light on and off
♦ Turn the LIGHT switch
switch the loudspeaker
♦ Turn the LIGHT switch
switch the loudspeaker
SLB 1.2 D2
4
8
into a USB socket of your audio device
9
, min. 500 mA. The power supply for the
is provided via this connection.
6
do not work without a USB connection!
6
clockwise until a click is heard in
4
further in a clockwise direction to
4
anticlockwise to decrease the volume.
4
anticlockwise until a click is heard
4
to the "ON" position in order to
light on.
6
to the "OFF" position in order to
light off.
6
is in the "OFF" position.
into the line out or headphone
on.
6
off.
6
GB │ IE │
21 ■