Handling And Operation; Pairing The Speaker With A Bluetooth ® Device - Silvercrest M SLM 5 A1 Guia De Inicio Rapido

Handling and operation

Pairing the speaker with a Bluetooth
NOTE
If you want to pair the loudspeaker with a Bluetooth
►
the 3.5 mm jack socket
When using the device for the first time, proceed as follows:
Ensure that the speaker is switched off and the Bluetooth
♦
device is switched on.
Set the Bluetooth
♦
devices. A detailed description of how to do this can be found in
the operating instructions for your Bluetooth
♦ Press and hold the
speaker on. You will immediately hear a rising sequence of beeps
and the operating/charging LED
twice. Then you will hear a beep and the operating/charging
flashes alternatively orange und blue. The Bluetooth
LED
function is now activated automatically.
♦ Select the entry
Bluetooth
connect the two devices. You will hear a beep and the operating/
charging LED
connection has been successfully established.
│ GB │ MT
■ 118
device so that it scans for other Bluetooth
®
button
®
device and, if required, enter the code
flashes blue every 3 seconds once the
may not be occupied.
for about 3 seconds to turn the
flashes blue and orange
from the list of found devices on your
®
device
®
device,
®
®
device.
to
SLM 5 A1
®
®