Transport Of The Machine; Rocker Lock; Electrical Connection - Scheppach wox d 700 Manual Del Usuario

Transport of the machine

To move the machine, take out the transport handle
(1) and to warrant a secure transport twist the
handle (2). ( Backup by screw head in transport
handle)

Rocker lock

• To transport the rocker circular saw lock in place
the rocker lock in position (1).

Electrical connection

• Connect the machine with a CEE-plug to the power supply, provided supply should be 16 .
• Switch on the machine with the power switch, the saw shaft runs up.
• Upon switching off the saw shaft is slowed down within 10 seconds.
Changing of rolling direction
The installed electrical motor is connected ready to operate. The connection
complies with the relevant VDE and DIN-regulations. The power supplied
by the customer as well as the used extension cable should comply
with these regulations resp. the local regulations.
Seite:56
2
1
1