Setting The Am Tuning Step; Switching The Warning Tone; Switching The Auxiliary Setting; Switching The Dimmer Setting - Pioneer DEH-P7550MP Manual Del Usuario

Initial Settings
tions with manual tuning or use seek tuning
again.

Setting the AM tuning step

The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
 1,602 kHz allowable) to 10 kHz (530  1,640
kHz allowable).
1 Press FUNCTION to select AM Step.
Press FUNCTION repeatedly until AM Step
appears in the display.
2 Press c or d to select the AM tuning
step.
Pressing c or d will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.

Switching the warning tone

If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1 Press FUNCTION to select Warning.
Press FUNCTION repeatedly until Warning
appears in the display.
2 Press a or b to turn Warning on or off.
Pressing a or b will turn Warning on or off
and that status will be displayed (e.g.,
Warning : ON).
All manuals and user guides at all-guides.com

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1
Press FUNCTION repeatedly until AUX ap-
pears in the display.
2
Pressing a or b will turn AUX on or off and
that status will be displayed (e.g.,
AUX : ON).

Switching the dimmer setting

To prevent the display from being too bright at
night, the display is automatically dimmed
when the cars headlights are turned on. You
can switch dimmer on or off.
1
Press FUNCTION repeatedly until Dimmer ap-
pears in the display.
2
Pressing a or b will turn Dimmer on or off
and that status will be displayed (e.g.,
Dimmer : ON).

Adjusting the brightness

You can adjust the display brightness. Initially
this mode is set to 12.
1
Press FUNCTION repeatedly until Brightness
appears in the display.
Press FUNCTION to select AUX.
Press a or b to turn AUX on or off.
Press FUNCTION to select Dimmer.
Press a or b to turn Dimmer on or off.
Press FUNCTION to select Brightness.
Section
09
39
En