Makita DLS713 Manual De Instrucciones página 2

ENGLISH (Original instructions)
SPECIFICATIONS
Blade diameter
Hole (arbor) diameter
Max. kerf thickness of the saw blade
Max. Miter angle
Max. Bevel angle
No load speed (RPM)
Dimensions (L x W x H)
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Max. Cutting capacities (H x W) with blade 190 mm (7-1/2") in diameter.
45° (left and right)
(Note)
* mark indicates that a wood facing with the following thickness is used.
1: When using a wood facing 20 mm thickness
2: When using a wood facing 15 mm thickness
3: When using a wood facing 10 mm thickness
Model
Net weight
Miter angle
0°
57° (right)
655 mm x 430 mm x 454 mm (25-3/4" x 17" x 17-7/8")
12.2 - 14.3 kg (27.0 - 31.6 lbs)
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
45° (left)
25 mm x 300 mm
(1" x 11 - 3/4") (2 - 1/16" x 11 - 3/4")
-----
25 mm x 212 mm
(1" x 8 - 3/8") (2 - 1/16" x 8 - 3/8")
-----
-----
(2 - 1/16" x 6 - 3/8")
-----
2 ENGLISH
DLS713
190 mm (7-1/2")
15.88 mm (5/8")
2.2 mm (3/32")
Left 47° , Right 57°
Left 45°, Right 5°
2,200 /min
D.C. 18 V
Bevel angle
0°
52 mm x 300 mm 40 mm x 300 mm
(1 - 9/16" x 11 - 3/4")
* 60 mm x 265 mm
(Note 1)
(2-3/8" x 10-3/8")
52 mm x 212 mm
* 60 mm x 185 mm
(Note 2)
(2-3/8" x 7-1/4")
52 mm x 163 mm
* 60 mm x 145 mm
(Note 3)
(2-3/8" x 5-3/4")
5° (right)
-----
-----
-----
-----
-----