Cleaning The Unit; Work Or Repairs At The Electrical Equipment; Setup On An Uneven Surface - WAGNER PROSPRAY 20 Instrucciones De Uso

SAFETY PRECAUTIONS
2.17

CLEANING THE UNIT

When cleaning the gun, only rinse when the nozzle is remo-
ved and rinse at low pressure.
When cleaning the unit with solvents, the
solvent should never be sprayed or pumped
back into a container with a small opening
(bunghole). An explosive gas/air mixture can
arise. Only use an earthed container made
from metal. To earth the gun, hold it rmly on
the edge of the container.
Danger of short-circuits caused by water in-
gression!
Never spray down the unit with high-pres-
sure or high-pressure steam cleaners.
2.18
WORK OR REPAIRS AT THE ELECTRICAL
EQUIPMENT
These may only be carried out by a skilled electrician. No lia-
bility is assumed for incorrect installation. Unplug the power
plug from the outlet before carrying out any repair work.
2.19
MAINTENANCE WORK AND BREAKS
Before carrying out any work on the device and during
any work break, release the pressure in the spray gun and
high-pressure hose. Secure the spray gun's trigger guard and
switch o the device.
2.20

SETUP ON AN UNEVEN SURFACE

The front end must always point downwards in order to avoid
sliding away.
If possible do not use the unit on an inclined surface since the
unit tends to wander through the resulting vibrations.
6
ProSpray 20