Specifications - Promax PRODIG-1+ Manual De Instrucciones

USER'S MANUAL PRODIG-1+.
The instrument is a useful tool when installing either a specific service or satellite, or
a series of services or satellites. Its specific use is determined by the instrument
programming, which in turn depends on the country or geographical area.
The PRODIG-1+ has been specially designed to stand rough working
conditions, it includes a back-light display and offers long battery life and short charging
times.

1.2 Specifications

TUNING
Frequency range
Measurement points
RF INPUT
Impedance
Connector
Level range
Maximum signal level
QPSK SIGNAL PARAMETERS
Symbol rate
Code rate
Spectral inversion
Quality level for acceptance
Initial values
Displayed information
Configuration
of measurement points
EXTERNAL UNITS POWER
SUPPLY
Output voltage
Maximum output current
22 kHz signal
Voltage
Frequency
BACK-LIGHT DISPLAY
Page 2
900 MHz to 2150 MHz.
16 maximum.
75 Ω.
Universal, including
interchangeable adapter.
30 dBµV to 90 dBµV.
120 dBµV.
1000 to 30000 kbauds.
Auto and 1/2, 2/3, 3/4, 5/6, 6/7, 7/8.
Automatic.
Definable by user.
BER = 2x10
IDENTIFY
:
SNR = 5 dB
ADJUST
:
Satellite's Azimuth, if it is detected.
Service name, network or bouquet, if it is
detected.
By means of serial connection to PC. (Cable
and program included).
Through the RF input connector.
13 V, 18 V. ± 1 V.
300 mA.
Selectable.
0.6 V ± 0.2 V.
22 kHz ± 4 kHz.
On, Off.
BNC and
-4
05/2003
F