Specifications - Promax US TV EXPLORER 2 User Manual

1.2

Specifications

CONFIGURATION FOR MEASURING LEVEL AND POWER
TUNING
Tuning modes
Resolution
Automatic search (Explorer)
Signal identification
RF INPUT
Impedance
Connector
Maximum signal
Maximum input voltage
DC to 100 Hz
5 MHz to 2150 MHz
DIGITAL SIGNALS MEASUREMENT
POWER RANGE
8-VSB:
QAM Annex-B:
QPSK/8PSK:
DSS:
MEASUREMENTS
ATSC (8-VSB):
Presentation:
2
The BER measurement shown by default (when PRN-23 BER option from Preferences menu is set to OFF)
yields an estimated value calculated using the MER measurement. In order to obtain a more accurate BER
measurement value, the PRN-23 BER option from Preferences menu must be set to ON and a PRN-23 signal
pattern must be used through the RF signal input [30].
If the input signal is like PRN-23 or a video signal, the BER and VBER measurement are considered as
≤
acceptable when BER/VBER
taken as reference measurement.
Page 4
USER'S MANUAL. US TV EXPLORER II
Digital frequency synthesis. Continuous tuning from
5 to 1000 MHz and from 950 to 2150 MHz.
Chanel or frequency (IF or downlink at satellite
band).
Channel plan configurable on demand.
5-1000 MHz: 50 kHz
950-2150 MHz: < 200 kHz (span FULL-500-200-
100-50-32-16 MHz).
Threshold level selectable.
Analogue and digital. Automatic.
75 Ω
Universal, with BNC or F adapter.
130 dBµV.
50 Vrms (powered by the AL-103 power charger).
30 Vrms (not powered by the AL-103 power charger).
130 dBµV.
45 dBµV to 100 dBµV.
45 dBµV to 110 dBµV.
44 dBµV to 114 dBµV.
44 dBµV to 114 dBµV.
2
Power, SER, VBER
,
Numeric and level bar.
≤
3*10E-6 and SER-ERR/s 2 being SER value the number of wrong packets
MER, C/N and noise margin.
10/2007