Device Description - Weller WD 1000T Manual De Instrucciones

WD 1 (M) / WD 1000
PK Elektronik Vertriebs GmbH, E-Mail: [email protected], Internet: www.pkelektronik.com

4 Device description

The Weller WD 1 (M) / WD 1000 is a versatile soldering station for
performing professional repair work on state-of-the-art electronic
assemblies in the industrial engineering sector as well as repair
workshops and laboratories.
Precise temperature control performance at the soldering tip is
guaranteed by the digital control electrotechnology together with
superior-quality sensor and heat-transfer technology. High-speed
measured-value acquisition provides for maximum temperature
precision and optimum dynamic temperature performance in load
situations.
All soldering irons (except for microtools) up to 80 Watts can be
connected to the WD 1. The temperature range is from 50 °C to
450 °C (150 °F to 850 °F). The WD 1M is multifunctional and all
soldering irons up to 150 Watts and microtools (WMRP & WMRT)
can be connected; the temperature range is from 50 °C to 450 °C
(150 °F to 850 °F). Setpoint and actual values are displayed in digital
from. Three temperature buttons are used to select fixed
temperatures directly. A flashing optical control check (" " symbol
on display) indicates that the preselected tool temperature has been
reached.
The Weller WD 1 (M) / WD 1000 soldering station also offers the
following functions:
− Automatic tool detection and activation of corresponding control
parameters
− Digital temperature control
− Option of inputting offset values
− Programmable temperature reduction (setback)
− Standby and lock functions
− Antistatic device design in accordance with ESD safety
− Different equipotential-bonding possibilities on the device
(standard configuration hard earthed)
− Customer-specific calibration function
4.1 Safety holder
The funnel insert (21) for holding the soldering iron has four different
settings and can be adjusted to the most ergonomic position without
requiring tools. There is a compartment (22) on the back for storing
soldering tips. The base plate on the compartment contains a
cleaning element (23) for cleaning the soldering tip.
5-18