Included In Delivery; Device Description; Technical Data - Weller DSX 120 Manual De Instrucciones

DSX 120
The manufacturer accepts no liability for any damage resulting from
failure to use the device in compliance with these operating
instructions or unauthorised modifications to the device.

3 Included in delivery

DSX 120 packed
 DSX 120 desoldering iron,
 XDS 1 Suction Nozzle Ø 1.4 mm
 Tip Cleaner WXDP/DSX 120
 Filter for glass tube
 Bounding cap (1 pce.)
 Operating Instructions for DSX 120

4 Device description

4.1 Desoldering iron DSX 120
The DSX 120 desoldering iron can be connected to all electronically
controlled WELLER desoldering tools with 120 W power ratings. A
high-quality sensor and heat transfer system guarantee precise
temperature control of the desoldering tool. The desoldering iron is
ideal for reworking and repairing conventional and SMD circuit
boards. A range of XDS Series suction nozzles provides solutions to
many desoldering problems. The suction process is started by
operating the finger switch. The tin collecting container comprises a
glass tube with a filter. The glass tube can be replaced easily and
quickly, minimising maintenance on the desoldering iron. The
handle, power cord and vacuum hose are made of an antistatic
material, which complements the high quality of this desoldering
iron.
Note The DSX 120 desoldering iron by Weller may only be operated
together with Weller WR 3M, WR 2 supply units.

Technical data

4.2
Temperature range
Tool cable
Heating element
Temperature sensor
Heating output
Voltage (heater)
Heat-up time
Connection
Weight
Suction nozzle type
Supply unit
T0051319899
T0051319899
T0051325099
T0058765772
(10 pce.) T0051360499
100°C - 450°C (212°F - 850°F)
Silicone rubber, heat resistant
Integrated heating wire element
Platinum sensor
120 W
24 V
(approx.) 35s (50°C to 350°C)
(120°F to 660°F)
6 pin connector, polarity protected with lock
104 g incl. tip and cable
XDS Series
Weller WR 3M, WR 2 stations
5-8