Zanussi ZOHKE2X1 Manual De Instrucciones página 43

12.2 How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
12.3 How to remove and install: Door
The oven door has two glass panels. You can remove the oven door and the internal glass
panel to clean it. Read the whole "Removing and installing door" instruction before you remove
the glass panels.
CAUTION!
Do not use the oven without the glass panels.
Step 1 Open the door fully and hold both
hinges.
Step 3 Close the oven door halfway to the
first opening position. Then lift and
pull forward and remove the door
from its seat.
1
Step 2 Lift and turn the levers fully on both
hinges.
Step 4 Put the door on a soft cloth on a stable
surface and release the locking system
to remove the internal glass panel.
2
ENGLISH 43