Xylem SI Analytics CT 72/2 Manual De Instrucciones página 79


Submenu TIMER




A
B
C1
Parameter level

Display of time until start:
In line 3 the notice >TIMER< and the set values for „TIME" and „DATE/YEAR" are
alternately indicated

Check the correct setting of the internal real time clock if required
(see MENU CONFIG)
The started program
After the start the program will indicate the currently calculated setpoint in line 2
S XX.XX. The value increases within the time period >TSLICE< until the target
temperature >SETPNT< of the section is reached.
If the time period in a section is set to „0", the next section will not begin until the target
temperature has been reached.
Use the edit keys
every 4 seconds between the current section (STEP XX) and the
A remaining time of the section
B remaining time of the program
C current bath temperature
I xxx.xx - internal actual value or
E xxx.xx – external actual value
Menu functions

set the time for the start of the program in the submenu
>TIMER<.
>TIME< hours/minutes (hh:mm), set both values one after the
other and confirm
•
hours flash, set by pressing
+
minutes flash, set by pressing
+
>DATE< day/months (TT/MM), set both values one after the
other and confirm.
•
day flashes, set by pressing
+
month flashes, set by pressing
+
>YEAR< year
•
Set the year with
and

The program starts at the set time.
to scroll to line 3. The display changes approximately
79
.