Cleaning - CASO DESIGN DryAged Master 63 Manual De Instrucciones

18.2 Cleaning

◆
Interior and exterior walls
Clean the interior and exterior walls with lukewarm water and a little washing-up liquid.
Never use cleaning or chemical solvents containing sand or acid.
Then wipe the device thoroughly with a soft cloth.
Switch on the UV light for 24 hours after each ripening process.
◆
Housing
Use a glass cleaner to clean the glass surfaces and a commercially available stainless
steel cleaner for stainless steel surfaces
Then wipe the device thoroughly with a soft cloth.
◆
Container for condensed water (K)
If there have been major temperature
fluctuations in the device or if you want to shut
down the device for a longer period of time, we
recommend checking of the container for
condensed water. Temperature fluctuations
can arise, for example, from a power failure,
prolonged / frequent opening of the door when
the device is switched on, or malfunctions in
the device. If necessary remove the
condensed water with a sponge from the
container for condensed water. The container is located on the back side of the device
at the right bottom. Please remove the metal cover and then screw it back on.
reservoirs from us, item number 693.
2a H2O-reservoir
2b Holder of reservoir
2c drip tray of reservoir
◆
H2O-reservoir
Remove holder of reservoir with drip tray
from the device. Remove the H2O-
reservoir. Release the drip tray by
pressing at the bottom side of the holder
and then pull it out. Clean the holder and
drip tray with lukewarm water and a little
washing-up liquid and then dry them.
Replace the H2O reservoir every 3
months after use.
You can order replacement H2O
44