Configuration Jumper To Connect With System 2Plus Or V2Plus (Only T-7822Vd); Fixing The Telephone - golmar 2PLUS Serie Manual De Instalación

62
Coming from previous page
T-7822VD:
S- S+
JP3 configuration jumper:
V2Plus system (video)
JP3
2Plus system (Audio)
JP3
*Factory default
F
ix the telephone to the wall.
Avoid placing the telephone near heating sources, dusty
locations or smoky environments. The telephone can be
fixed in a universal embedding box or directly on the wall.
For direct fixation on the wall, drill two holes of
the specified positions
25mm screws.
BUS HZ HZ PA PB BUS E.of.Líne
For wiring and fixing purposes, it is necessary to open the
telephone. Lever slightly with a plain screwdriver into the
slots as it is shown in the picture.
, using 6mm wall plugs and Ø3,5 x
Pass the wires through the arranged hole and connect them to the power
supply connector according to the installation diagrams. Close the
telephone as shown on the picture. Then, connect the handset by means
of the telephone cord and put it down on the hook.
TELEPHONE DESCRIPTION
T
erminal connection description
and JP3 configuration jumper.
S+, S-: Connection to call repeater S-45.
BUS: Digital communication bus.
HZ : Connection to door bell.
PA, PB: Free-voltage connectors (see page 65).
BUS: Digital communication bus.
End of Line: No function.
TELEPHONE INSTALLATION
Ø6mm on