Modules Assembly - golmar 2PLUS Serie Manual De Instalación

DOOR PANEL INSTALLATION
D
oor panel modules assembly.
Insert the lower closing head (marked ABAJO) in the lower module and fix it by screwing the module
shafts.
Place the module holder between the lower module and the next module, but make sure that the
holder notches are inside the door panel. Fix the following module screwing the shafts. Repeat this
procedure in case the door panel has another module (the maximum number of modules linked
vertically is three).
Insert the upper closing head (marked ARRIBA) in the last module and fix it using the supplied screws.
Pass the wiring through the hole made in the embedding box.
Fit, flush and level it. Then, once it is placed, remove the
protective labels from the fixation holes of the door panel.
P
lace the embedding box.
53