Cpap Patient Menu; Patient Messages; Reminders - DeVilbiss Healthcare SleepCube Standard CPAP DV51 Serie Guía De Instrucciones

EN
Patient Menu Layout
The following chart shows by Mode each Display you will scroll through using the Next or Previous buttons on the keypad. Pressing the Down key
at the Enable Menu Display will allow you to enter this submenu - then use Next or Previous buttons to scroll through it; press the Up button to
return to main menu. Once the final Display is reached, pressing the Next button will return you to the first Display.
cPAP MENu
P:10.0 CPAP
Heat:5
Set Pressure
10.0 cmH20
Delay Time

10 minutes
Delay Pressure
5.0 cmH20
Enable Menu
Press 
LCD Contrast Adj
50%
Compliance Meter
123456.7 hours
Hourmeter
123456.7 hours
Firmware Version
V0.019 05/01/2007
Serial Number
HD123456
Adherence Score
83% (25/30)
SmartCode 1-Day
G201-0Y7-6GPH

PaTienT messaGes

Your SleepCube will alert you of issues that may require some action on your part in order to make your therapy more effective. These messages
are displayed when the device is turned on, either by pressing the ON/OFF button or by breathing into the mask. You can press any key or button
to clear the message from the display, but the SleepCube will operate normally even if the message is not cleared.
Two kinds of messages are displayed: Reminders and Notifications.

Reminders

Reminders alert you when parts of your system need to be replaced. Some components of your system wear over time and, if not replaced, may
compromise your therapy. If you see a message on the display that is not listed below, you may have the optional DeVilbiss SmartLink™ Module
SE-DV51
10
aDVancED mEnu controlS/patiEnt mESSagES
Auto-ON
Enabled
Auto-OFF
Enabled
Exit Menu
Press 