Introduction Of Audio Adjustments; Using Balance Adjustment; Using The Equalizer; Recalling Equalizer Curves - Pioneer DEH-50UB Manual De Instrucciones

Audio Adjustments
Introduction of audio
adjustments
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se
lect.
3 Turn MULTI-CONTROL to select the
audio function.
FADER/BALANCE (balance adjustment)
PRESET EQUALIZER (graphic equalizer recall)
EQ SETTING 1 (graphic equalizer adjust
ment) EQ SETTING 2 (graphic equalizer fine
adjustment) LOUDNESS (loudness)
SW SETTING 1 (subwoofer on/off setting)
SW SETTING 2 (subwoofer setting)
HIGH PASS FILTER (high pass filter)
BASS BOOST (bass boost) SRC LV ADJUST
(source level adjustment)
4 Press MULTI-CONTROL to display the
setting mode of each function.
5 Adjust the each function.
Notes
! To return to the previous display, press BACK.
! To return to the main menu, press and hold
BACK.
! To return to the ordinary display, press
BAND/ESC.
! When the subwoofer controller setting is
PREOUT:REAR, you cannot switch to
SW SETTING 1 (subwoofer on/off setting).
(Refer to page 28.)
! You can select the SW SETTING 2 only when
subwoofer output is turned on in
SW SETTING 1.
! When selecting FM as the source, you cannot
switch to SRC LV ADJUST.
! If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so
that it can provide the ideal listening environ
ment in all occupied seats.
1 Use MULTI-CONTROL to select
FADER/BALANCE.
2 Press MULTI-CONTROL to display the
setting mode.
3 Press MULTI-CONTROL to select the seg-
ment you wish to set.
Press MULTI-CONTROL repeatedly to switch
between fader and balance.
4 Turn MULTI-CONTROL to adjust speaker
balance.
Front/rear speaker balance can be adjusted
between FAD F15 and FAD R15.
Left/right speaker balance can be adjusted be
tween BAL L15 and BAL R15.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
# FAD 0 is the proper setting when only two
speakers are used.
# When the rear output setting is
REAR SP :SUB W, adjusting the front/rear speak
er balance is not effective. Refer to Setting the
rear output and subwoofer controller on page
28.

Using the equalizer

The equalizer lets you adjust the equalization
to match the car's interior acoustic character
istics as desired.

Recalling equalizer curves

There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
POWERFUL Powerful
NATURAL
Natural
VOCAL Vocal
Section
03
23
En