Tabla de contenido
Problem
The turntable is connected to the jacks
The volume level is
other than the PHONO jacks.
low while playing a
record.
Incorrect setting for the PHONO switch
on the rear panel.
The power of this unit is turned off.
The sound is
degraded when
listening with the
headphones
connected to the CD
player connected to
this unit.
Wrong distance or angle.
The remote control
does not work or
function properly.
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
The batteries are weak.
Taking care of this unit
When you wipe this unit, do not use chemical solvents
(ex. alcohol or thinner, etc.); this might damage the
finish. Use a clean, dry cloth. For heavy dirt, dampen a
soft cloth in detergent diluted with the water, wring it
out, and then clean this unit up with the cloth.
The screws on the side panels may loosen as wood
expands and contracts. In this case, tighten the screws.
Cause
Connect the turntable to the PHONO jacks.
Switch the PHONO switch to the MM or MC position
according to the type of magnetic cartridge of the
turntable.
Turn on the power of this unit.
The remote control functions within a maximum
range of 6 m (20 ft) and no more than 30 degrees off-
axis from the front panel.
Reposition this unit.
Replace all batteries.
Remedy
See
page
11
11
6
6
—
12
25
En
Capítulos
Tabla de contenido
