Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6 KEYBOARD FUNCTIONS AND LCD DISPLAY
6.1 KEYBOARD
All CLIC-02 include incorporated LCD Display and Keyboard. The keyboard and the
display are used more often for adjustment of the timers/counters, changes of CLIC-02
Mode (put in RUN/STOP), load and save in the PM05 memory card and update the RTC
(Real Time Clock). Although the program edition may be done by the keyboard and
display, it is highly recommended to make changes in the program logic only using
CLIC-02 Programming Software. Below, an overview of the basic keyboard and the
display functions.
SEL- Used to select the available memory and types of edition instruction. Pressing the
SEL button will enable the display of all "H" HMI/Text messages on the LCD display. OK -
Used to accept the selection of an instruction or function shown. It is also used to
select any of the options of the Main Menu on the LCD display.
ESC - used to exit a screen and go to a previous screen. Example: when the Ladder
programming screen is active, press ESC to display the main menu.
DEL – Used to delete an instruction or a line of the Ladder program.
The four navigation buttons (↑←↓→) are used to move the cursor through the functions
of CLIC-02. These four buttons can also be used as digital markers Z01-Z04, which will
actuate in the program logic ('↑'= Z01, '←'=Z02, '↓'=Z03, '→' =Z04);
Keyboard Functions and LCD Display
- English -
CLIC-02 | 55
Capítulos
Tabla de contenido
