WEG CLIC-02 Manual Del Usuario página 144

Hardware Specification
9.4 DIGITAL OUTPUTS SPECIFICATIONS
Content
Output circuit
External Voltage
Circuit insulation
Maximum Resistive
load
Lighting
Leakage Current
(Open Collector)
Minimum load
Response Off -> On
Time
On -> Off
9.4.1 Output connection instructions
9.4.1.1 Lighting load
The current comsumption of a Light Bulb is 10~20 times higher during the initial 10ms
the Light Bulb is on, since the filament is not heated. A distribution resistance or current
restriction resistance is added to the output port to reduce the peak current value.
Distribution Resistance
Distribution
Resistance
There is a small current flowing that makes
the light glimmer; this resistance value must
be chosen carefully.
144 | CLIC-02
Relay
Load
Voltage
CLIC-02
< 265 Vac, 30 Vcc
Mechanical insulation (relay)
8 A / point
200 W
−
−
15 ms
15 ms
Output
- English -
Transistor
Load
Voltage
23,9~24,1 Vdc
Opto-coupling insulation
0.3 A / point
10 W / 24 Vcc
< 10uA
25 us
< 0,6 ms
Current Restriction Resistance
Restriction
Resistance
The brightness will be reduced if the
resistance value is too high.
CLIC-02
−
Output