Grundig GKPN 66830LXP Manual De Instrucciones página 19

1. Fault Condition Indicator
This indicator (
when your refrigerator cannot
perform adequate cooling or in
case of any sensor error. On the
freezer compartment temperature
indicator the letter "E" and on the
cooler compartment temperature
indicator the numbers 1, 2, 3
will be displayed. The numbers
on the indicator specifies the
service regarding the failure. If
you place hot food in the freezer
compartment or leave its door
open for a prolonged time, an
exclamation mark can be lit. This
is not a fault, this warning shall be
removed when the food is cooled
down or when any key is pressed.
2. Energy Saving (Display Off)
Indicator
Energy saving function is enabled
automatically and the energy
saving symbol (
when the door of the product is not
opened or closed for some period
of time. When the energy saving
function is active, all symbols on
the screen other than the energy
saving symbol shall be turned off.
When the energy-saving function is
active, pressing any key or opening
the door will deactivate the energy-
saving function and the display
signals will return to normal.
The energy-saving function is a
function activated ex-factory and
cannot be cancelled.
3. Wireless Key
This button (
to connect wirelessly to your
appliance through HomeWhiz
mobile application. If the button
is pressed for a long time (3 secs)
20
) shall be active
) is displayed
) is utilized
the LED on the button will blink
(in 0.5 second intervals). The link
between the appliance and the
home network is initialized. After
the wireless connection with the
appliance is established the LED
will be lit solid. After initial setup,
the connection can be activated/
deactivated by pressing this button.
The LED on the button shall flash
quickly (at 0.2 second intervals)
until the connection is established.
When the connection is active, the
LED shall light up continuously.
If the connection cannot be
established for a long period,
check your connection settings
and refer to the "Troubleshooting"
section provided in the user
manual. HomeWhiz application
shall be used for wireless
connection. The steps for setup are
explained through the application
during setup. You can access the
application by scanning the QR
code on the HomeWhiz label on the
appliance. The application can be
obtained from App Store or from
Play Store for Android devices.
For details visit https://www.
homewhiz.com/.
4. Cooling Compartment
Temperature Setting Key
Allows setting of temperature for
cooler compartment (
this key will enable the cooling
compartment temperature to be
set at 8,7,6,5,4,3,2 and 1 °C .
). Pressing