Bosch CCS180 Manual Del Usuario página 14

BM 2610034442 03-14_CCS180 3/27/14 12:25 PM Page 14
Service
NO USER SERVICEABLE
W RNING
PARTS INSIDE. Preventive
maintenance performed by unauthorized
personnel may result in misplacing of
internal wires and components which
could cause serious hazard. We recom -
mend that all tool service be performed by a
Bosch Factory Service Center or Authorized
Bosch Service Station. SERVICEMEN:
Disconnect tool and/or charger from power
source before servicing.
BATTERIES
Be alert for battery packs that are nearing
their end of life. If you notice decreased tool
performance or significantly shorter running
time between charges then it is time to
replace the battery pack. Failure to do so can
cause the tool to operate improperly or
damage the charger.
TOOL LUBRICATION
Your Bosch tool has been properly lubricated
and is ready for use.
D.C. MOTORS
The motor in your tool has been engineered
for many hours of dependable service. To
maintain peak efficiency of the motor, we
(*= standard equipment)
(**= optional accessories)
* rip fence
All manuals and user guides at all-guides.com
Maintenance
recommend it be examined every six
months. Only a genuine Bosch replacement
motor specially designed for your tool should
be used.
Bearings which become noisy (due to heavy
load or very abrasive material cutting) should
be replaced at once to avoid overheating and
motor failure.
charger from the power supply before
cleaning. The tool may be cleaned most
effectively with compressed dry air. Always
wear safety goggles when cleaning tools
with compressed air.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed
objects through opening.
plastic parts. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
Accessories
*
** 6-1/2" thin kerf 24 tooth carbide blade
-14-
BEARINGS
Cleaning
To avoid accidents, always
W RNING
disconnect the tool and/or
Certain cleaning agents
C UTION
and solvents
6-1/2" thin kerf 18 tooth carbide blade
damage