RIDGID SS1650 1 Manual Del Usuario página 10

Getting to Know Your Scroll Saw (continued)
13. Speed Control/On-Off Knob - For
speed control setting, refer to the
"Choice of Blade and Speed" table.
The On-Off knob has a locking fea-
ture, This Feature Is Intended To
Help Prevent Unauthorized Use By
Children And Others.
• To turn machine "ON", place fingers
on Speed Control/On-Off Knob and
pull out.
• To turn machine "OFF", push in
Speed Control/On-Off Knob.
WARNING
: Never leave the machine
unattended until it has come to a
complete stop.
The variable speed control may be
adjusted to the approximate speeds iden-
tified on the control panel. Suggested
speeds are identified under "Choice of
Blade and Speed". Turn the control knob
clockwise to increase strokes per
minute and counterclockwise
reduce the strokes per minute.
• To lock knob in "OFF" position, install
a padlock through the hole below
the knob as illustrated, and lock the
padlock. (Padlock is not supplied
with the saw.)
WARNING
: For your own safety,
always push the knob "Off" when
machine is not in use. Also, in the
event of a power failure (all of your
lights go out), push knob "Off".
"Lockout" your knob with a padlock
as shown. This will prevent the
machine from starting up again
when the power comes back on.
to
10
Rotate
Speed
Control
Install
Padlock
Through Hole
5/32 to 3/16 Inch
Approximate
Diameter
1 Inch Approximate
Approximate
Padlock Size