Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5. Specifications
Model name
Projection method
Panel resolution
Light type
Screen sizes
Contrast ratio
Lens adjustment function
Signal input ports
External Control
Power supply voltage
Input current
Power consumption
Cooling method
Noise level
Installation
Net weight
Dimensions
Environment
(Note 1) The video input slots are empty when the device is shipped. Input ports can be added by mounting option boards, which
are sold separately.
(Note 2) The value is typical.
(Note 3) This product conforms to the harmonic current standard "JIS C 61000-3-2".
* Note that these specifications and design can change without prior notice.
NP-NC1402L
3 chip DLP Cinema® method
0.69-inch DC2K chip
2048 x 1080
Laser diode
Max. 14 m @14ft-L / Screen Gain 1.8 (Depends on setup conditions)
1600:1 with DCI specified color representation
Motorized lens shift (vertical/horizontal), motorized zoom, motorized focus, douser
When shipped from factory: Empty
(for mounting optional components) (Note 1)
RS-232C (D-sub 9pin) x 1
GPIO port (D-sub 37 pin) x 1
Service terminal (stereo mini jack) x 1
3D CTL (D-sub 15 pin) x 1
USB (Type A) x 1
Interlock port x 1
Ethernet port (G-bit RJ-45) x 1
AC 200 to 240 V, 50/60 Hz single phase
9.5A (Note 3)
1,750W (200V) (Note 2)
Air cooling system and liquid cooling system
Less than 49 dB
Orientation: Desktop/front, Desktop/rear, Ceiling/front, Ceiling/rear
69 kg (Excluding lens)
700 mm (W) x 812 mm (D) x 288 mm (H) (Does not include protruding portions, includes foot.)
Operating temperature: 10 to 35°C
Operating humidity: 10 to 85% (non-condensing)
Storage temperature: -10 to 50°C
Storage humidity: 10 to 85% (non-condensing)
Operating altitude: 0 to 3000 m/9800 feet
E-23
Tabla de contenido
