Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. Cleaning the Air Filters
4. Attach the air filter to the main unit.
(1) Insert the tabs of the air filter into the grooves on the main unit.
(2) Bow the center of the air filter by using your fingers and pinch the grip to insert the top of the air filter into the
protrusions.
Note: When doing so, be careful not to bend the fir filter beyond repair.
5. Attach the filter cover to the main unit.
There are tabs at the top and bottom and 2 locations
on the right end of the filter cover.
There are grooves at the top and bottom and 2 loca-
tions on the right end of the main unit.
Slide the filter cover to the right and push it in while
keeping the filter cover in close contact with the main
unit. Each tab will go into the groove.
Cleaning the Air Filter (Top)
1. Remove the filter panel.
Turn the screw counterclockwise until it is loose,
then lift up the filter panel slightly to remove it.
• The screw cannot be removed.
2. Use a vacuum cleaner to remove the dust.
Use a vacuum cleaner to suck up the dust on the front and rear of the filter panel (air filter) and the main unit.
Caution: Do not remove the air filter. It may get bent and broken, thus becoming unusable.
1
Tab
Groove
Tab
E-15
2
Protrusion
Grip
Groove
Tabla de contenido
