Ryobi RLT430CESB Manual De Utilización página 18

CAUTION:
CAUTION:
SERVICE
Servicing requires extreme care and knowledge and should be
performed only by a qualified service technician. For service we
suggest you return the product to your nearest AUTHORISED
SERVICE CENTER for repair. When servicing, use only identical
replacement parts.
WARNING:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual. If you
do not understand the warnings and instructions in the
operator's manual, do not use this product. Call Ryobi
customer service for assistance.
WARNING:
The operation of any power tool can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety glasses
with side shields and, when needed, a full face shield.
We recommend Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.
Always use eye protection which is marked to comply
with EN 166.
SAVE THESE INSTRUCTIONS
INTRODUCTION
This product has many features for making its use more pleasant
and enjoyable. Safety, performance, and dependability have been
given top priority in the design of this product making it easy to
maintain and operate.
DESCRIPTION OF FIGURES
Fig 1
1. Primer bulb
2. Choke lever
3. Fuel cap
4. Rear handle
5. Throttle trigger
6. Starter grip and rope
7. Trigger lock
8. On/Off switch
9. Strap hanger
10. Foam tube
11.Front handle
12. Coupler
13. Knob
14. Grass deflector
15. Drive shaft housing
16. Reel Easy™ line trimmer head
English(Original instructions)
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
Fig 2
18. Button
19. Guide recess
20. Power head shaft
21. Positioning hole
22. Trimmer attachment
Fig 3
23. Hanger cap
24. Hole in hanger cap
25. Hole on attachment
Fig 4
26.Clamp Assistant
27. Barrier
28. Bolt
Fig 5
29. Cut-off blade
Fig.17
30. Oil cap/ dipstick
31. Hatched area
32. Oil fill hole
33. Funnel
Fig.14
33. Full choke position
35. Half choke position
36. Run position
Fig.19
37. Cover
38. Latches
39. Bump/ feed knob
40. Hex bolt
41. Spool
42. Spring
43. Line trimmer head
44. Latch opening
Fig.8
45. Hex-shaped opening
46. Align line on knob with arrows
47. Eyelet
Fig.10
48. Idle speed screw
Fig.15
49. Latch
Fig.21
16