Bosch GCM 10 PROFESSIONAL Instrucciones De Servicio página 14

GCM10_ASIA.book Seite 6 Dienstag, 18. September 2007 9:40 09
Product Elements
The numbering of the machine elements refers to the
illustrations of the electro tool on the front pages of the
operating instructions.
1 Handle
2 On/Off switch
*
3 Locking lever
4 Swinging guard
5 Saw blade
6 Fence
7 Quick action clamp
8 Table insert
9 Scale for miter angle (horizontal)
10 Fine scale
11 Locking clamp
12 Locking knob for variable miter angles (horizontal)
13 Lever for miter angle adjustment (horizontal)
14 Detents for standard miter angles
15 Saw table
16 Mounting holes
17 Holes for quick action clamp
18 Socket head screws (6 mm) of the saw table ex
tension
19 Holes for extension hoop
20 Saw table extension
21 Allen key (6 mm) / Phillips screwdriver
22 Fence extension
23 Stop bolt for 33,9° bevel angle (vertical)
24 Pin of the setting knob for 33.9° bevel angle
(vertical)
25 Roller
1 619 P04 359 • (2007.09)
26 Transport locking pin
27 Dust bag
28 Protective hood
29 Transport handle
30 Clamping lever for fence extension
31 Setting knob for 33.9° bevel angle (vertical)
32 Clamping handle for variable bevel angle (vertical)
33 Elongated hole
34 Sawdust ejector
35 Socket head screws (6 mm) of the fence
36 Ring/open ended wrench (ring: 13 mm; open
ended: 12 mm)
37 Phillips screw (attachment of the swinging guard)
38 Spindle lock
39 Hex head bolt for attaching the saw blade
40 Clamping flange
41 Tool spindle
42 Length stop
43 Extension hoop
44 Clamping lever of the quick action clamp
45 Threaded rod of the quick action clamp
46 Screws of the table insert
47 Angle indicator (vertical)
Not all the accessories illustrated or described are in
cluded in standard delivery.
*
Not included for the tool executions:
0 601 B20 004, ... 005, ... 006, ... 034, ... 037,
... 040, ... 043, ... 050.
The swinging guard 4 cannot be locked. Perform the
operations described in the following accordingly with
out the locking lever 3.
English–6