Agilent TPS-mobile Instrucciones De Uso página 249

Technical Information
Table 7
Characteristic
Turbo Pump
TMP Flange
Forepump
Voltage
Base Pressure *
N Pumping Speed (L/s)
2
He Pumping Speed (L/s)
H Pumping Speed (L/s)
2
TMP Rotational Speed
Start-up time
Operating Position
Ambient Temperature
Bakeout Temperature
Protection Breaker
Installation category
Pollution Degree
Compliance with:
Indoor Use
Max altitude
Serial Communication kit
Storage Temperature
Agilent TPS-mobile User Manual
TPS-mobile 115 V Technical Specification
X3581-64000, X3581-64002, X3581-64004, X3581-64006,
X3581-64008, X3581-64010, X3581-64012, X3581-64014,
X3581-64016, X3581-64018, X3581-64020, X3581-64022,
(according to standard DIN 28 428, the base pressure is that measured
in a leak-free test dome, 48 hours after the completion of test dome
bake-out, with a Turbopump fitted with a ConFlat flange and using the
X3581-64027, X3581-64029, X3581-64031
305 FS
CFF 6
IDP-3 (no gas flow), IDP-7, IDP-15, TS300, DS302, DS602
115 V / 50-60 Hz
< 1 x 10 -10 mbar (< 1 x 10
recommended pre-vacuum pump)
250
255
220
60600 rpm (1010 Hz driving frequency)
<3 min. (can be longer in case of Soft Start active)
On a flat floor
+5 °C to +35 °C
max 100 °C on Inlet Flange
14A
EN 55011 (Class A Group 1)
EN 61326-1
EN 61010-1
EN 1012-2
EN 12100
RoHS: EN 63000
Only
2000 m
A-Plus
-20°C to +70°C
-10 Torr)
II
2
249