Agilent TPS-mobile Instrucciones De Uso página 222

Instructions for Use
Figure 81 System activation
The system activation by means of the Main Switch provides voltage to TMP

controller but both TMP and Foreline pump continue to be switched off.
The system activation (with models TwisTorr 74 FS, TwisTorr 305 FS and
TwisTorr 305 FSQ) allows the TMP controller to start reading the pressure data
through the optional gauge FRG-700 if it is connected to the gauge connection
port on the rear side of the system.
The system activation (with Turbo-V 551 models) allows the controller
to start reading the pressure data through the XGS-600 controller and the
IMG-100 gauge both optional, if these are connected to the gauge connection
port at the rear of the system.
Figure 82 Gauge connection
222
Main switch
(with overcurrent protection)
Gauge port
Serial port
Agilent TPS-mobile User Manual