Agilent TPS-mobile Instrucciones De Uso página 248

Tabla de contenido
Technical Information
Table 6
Characteristic
Turbo Pump
TMP Flange
Forepump
Voltage
Base Pressure *
N
Pumping Speed (L/s)
2
He Pumping Speed (L/s)
H
Pumping Speed (L/s)
2
TMP Rotational Speed
Start-up time
Operating Position
Ambient Temperature
Bakeout Temperature
Protection Breaker
Installation category
Pollution Degree
Compliance with:
Indoor Use
Max altitude
Serial Communication kit
Storage Temperature
248
TPS-mobile 230 V Technical Specification
X3581-64001, X3581-64003, X3581-64005, X3581-64007,
X3581-64009, X3581-64011, X3581-64013, X3581-64015,
X3581-64017, X3581-64019, X3581-64021, X3581-64023,
X3581-64024, X3581-64025, X3581-64026, X3581-64028,
(according to standard DIN 28 428, the base pressure is that measured
in a leak-free test dome, 48 hours after the completion of test dome
bake-out, with a Turbopump fitted with a ConFlat flange and using the
X3581-64030, X3581-64032
305 FS
CFF 6
IDP-3 (no gas flow), IDP-7, IDP-15, TS300, DS302, DS602
230 V / 50 Hz
< 1 x 10
-10
mbar (< 1 x 10
recommended pre-vacuum pump)
250
255
220
60600 rpm (1010 Hz driving frequency)
<3 min. (can be longer in case of Soft Start active)
On a flat floor
+5 °C to +35 °C
max 100 °C on Inlet Flange
14A
EN 55011 (Class A Group 1)
EN 61326-1
EN 61010-1
EN 1012-2
EN 12100
EN 63000
Only
2000 m
A-Plus
-20°C to +70°C
Agilent TPS-mobile User Manual
-10
Torr)
II
2
Tabla de contenido
loading

Productos relacionados para Agilent TPS-mobile

Tabla de contenido