Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
ENGLISH
REARMING BALTIC AUTOMATIC VERSION
Unscrew the used capsule anticlockwise
1.
by the inflation mechanism. Replace the capsule if it has been activated or if it has passed its
expiry date
6
, which is stamped on the side of the capsule. For example, 11 2021 means
it must be replaced before November 2021.
Refit the examined capsule if ok if not screw in a new capsule clockwise and tighten it by hand
2.
until no threads are visible. The lower indicator window on the valve head should now be green.
Remove the cylinder retaining strap
3.
the cylinder in an environmentally friendly manner. Check that the lever and the pin (visible at the
bottom of the valve head next to the CO
on the activating cord. Fold back the lever and secure it by pressing it against the valve head
until it clicks into place.
Visually check that the O-ring in the bottom of the valve head, next to the CO
4.
is undamaged
.
11:2
Screw in a new, clean and unpierced CO
5.
Use no tools. Refit the cylinder retaining strap over the cylinder
When both capsule and CO
cylinder are mounted correctly, both indication windows should be green.
2
REARMING BALTIC MANUAL VERSION
Remove the cylinder retaining strap
1.
the cylinder in an environmentally friendly manner. Check that the lever and the piercing pin
(visible at the bottom of the thread for the CO
activating cord. Fold back the lever and secure it by pressing it against the valve head until it
12
clicks into place.
Visually check that the O-ring in the bottom of the valve head, next to the CO
2.
is undamaged
11:2
.
Screw in a new, clean and unpierced CO
3.
Use no tools. Refit the cylinder retaining strap over the cylinder
When the CO
cylinder is mounted correctly, the indicator window should be green.
2
REPACKING
BEFORE REPACKING
Follow these instructions carefully.
Repacking must be carried out with dry hands, in dry surroundings and without tools.
Place the inflatable lifejacket, back downwards, on a flat surface
Make sure the lifejacket is deflated and the mouth inflation tube's cap is in the normal position
and the indicator shows green.
All manuals and user guides at all-guides.com
10
. Follow the illustrated instructions on the label
and unscrew the CO
cylinder anticlockwise. Discard
11:3
2
cylinder's fastening)
11:1
can move freely, by pulling
2
cylinder's fastening,
2
cylinder using only hand force until absolutely tight.
2
.
11:3
and unscrew the CO
cylinder anticlockwise. Discard
11:3
2
cylinder
11:1
can move freely, by pulling on the
2
cylinder's fastening,
2
cylinder using only hand force until absolutely tight.
2
.
11:3
12
,
21
.
BALTIC LIFEJACKETS – USER'S GUIDE
BALTIC INFLATABLE LIFEJACKETS WITH ZIPPED PROTECTIVE COVER
Release the zip slider by pulling it to the end of the longer zip
1.
lifejacket. Pull the slider back clockwise, to the right hand side of the lifejacket.
Put the zip together like on a normal jacket
14
2.
lifejacket, at the same time folding the lung according to the instructions below.
Fold under in a Z-shape
15:1
.
3.
Fold under in a Z-shape
15:2
.
4.
Fold under in a Z-shape
16
.
5.
Fold under in a Z-shape
17:1
.
6.
Fold under in a Z-shape
17:2
.
7.
The lifejacket is closed by pulling the slider round the lifejacket
8.
next to the two quick release openings
,
1
2
end-stop at the end of the zip
19
. Place the zip's end in the lifejacket
Make sure the activating cord is exposed by pushing it through the opening in the back of the
9.
outer cover before closing the lifejacket
3
.

SPARE PARTS

The following spare parts are available from Baltic retailers:
Rearming kit Baltic 20 g CO
cylinder, Part No 2420. Includes 20 g CO
2
Capsule, Part No 2407. Includes automatic capsule.
Whistle
Reflector kit
Crutch strap kit 30 mm
ACCESSORIES
There are a number of accessories for inflatable lifejackets, which can be used in different situations.
These accessories are available through Baltic retailers.
This product complies with the Council Directive 89/686/EEC
Type approved by FORCE Certification A/S, NB 0200, Park Allé 345, 2605 Brøndby, DK
The model name is written on the front of the product.
The date of manufacture is printed on the product's inspection history label.
12
13
, on the left hand side of the
, and pull the slider anticlockwise round the
18
. Secure the Velcro strip
. Take care to stop the slider at the first
20
.
cylinder.
2
13
Tabla de contenido
loading

Tabla de contenido