Dual Display Operation Examples - DATATEC EDU34450A Guia Del Usuario

– To change the secondary measurement, press Meas to switch between the available options.
– To change the range of the secondary measurement, press Range to switch between the available options.
– To change the resolution of the secondary measurement, press Resolution to switch between the available
options.
– To disable the secondary measurement, press 2nd Meas ON | OFF.

Dual Display Operation Examples

This section describes some practical operations when using dual display feature.
Measure DC Voltage and AC Ripple on a Rectification Circuit
A single measurement for both DC voltage and AC ripple can be displayed through both displays while testing a
rectifier circuit.
1. Connect the red and black test leads to the input terminal and probe the test points.
66 Keysight EDU34450A User's Guide