Remote Interface Connections; Connect To The Instrument Via Usb - DATATEC EDU34450A Guia Del Usuario

Local Language Help
All messages, context-sensitive help, and help topics are available in English, French, German, Spanish, Simplified
Chinese, Traditional Chinese, Japanese, Korean, and Russian. All messages, context-sensitive help, and help topics
appear in the selected language. The softkey labels and status line messages are not translated and are always in
English. To select the language, press
desired language.

Remote Interface Connections

This section describes how to connect to the various communication interfaces to your instrument. For further
information about configuring the remote interfaces, refer to
If you have not already done so, install the Keysight IO Libraries Suite, which can be found at
sight.com/find/iolib. For detailed information about interface connections, refer to the Keysight Technologies
USB/LAN/GPIB Interfaces Connectivity Guide included with the Keysight IO Libraries Suite.

Connect to the Instrument via USB

The following figure illustrates a typical USB interface system.
1. Connect your instrument to the rear USB port on your computer using a USB cable.
2. With the Connection Expert Utility of the Keysight IO Libraries Suite running, the computer will automatically recog-
nize the instrument. This may take several seconds. When the instrument is recognized, your computer will display
the VISA alias, IDN string, and VISA address. You can also view the instrument's VISA address from the front panel
menu.
3. You can now use Interactive IO within the Connection Expert to communicate with your instrument, or you can pro-
gram your instrument using the various programming environments.
The USB cable is not recommended to be longer than 3 meters.
Keysight EDU34450A User's Guide
[Shift] > [Store/Recall] | Utility
Remote Interface
> User Settings > Language. Then select the
Configuration.
www.key-
49