Instrument Status Indicators - DATATEC EDU34450A Guia Del Usuario

Legend Description
1 Primary measurement function name
2 Primary measurement value
3 Primary measurement parameters
4

Instrument status indicators

5 Softkey menu name
6 Softkey labels
7 Measurement unit
8 Secondary measurement function, value, and parameters (when turned ON)
Instrument Status Indicators
Legend Description
USB flash drive is connected
LAN is connected
Instrument in remote mode
Secondary measurement is turned on.
Data is logged through data log operation.
Shift is enabled.
Auto Trigger Instrument is running in continuous mode.
Probe Hold Probe hold is turned on.
Wait For Trigger Data log have been turned on; instrument is waiting for data log trigger.
Data logging Data log is running.
Immediate Trigger Only available for remote mode, shown when READ? is sent to the instrument.
shown after the instrument has captured a reading.
Bus Trigger Only available for remote mode, shown when bus trigger is selected.
command is sent to the instrument and the instrument has captured a reading.
Wait for Bus Only available in remote mode, shown when bus trigger is selected and INIT command is sent to the
instrument.
Data Log Delaying Only available when trigger delay is set more than 0 s with data log enabled, shown after Run/Stop is
pressed.
Keysight EDU34450A User's Guide
Immediate Trigger is
Bus Trigger is shown after INIT
19