Teac AI-301DA Manual Del Usuario página 13

How to connect speakers
1
Turn the terminal cap counterclockwise to loosen it. The speaker terminal
caps cannot be fully removed from the unit.
2
Insert the wire into the terminal and turn the terminal cap clockwise to
securely connect it:
o Make sure none of the wire insulation is under the terminal and only the bare, stripped wire
is touching the terminal.
3
Confirm that the cable is fastened securely by gently pulling the cable.
Connecting with banana plugs
You can also make connections using commercially-available banana plugs. First, connect the
banana plugs to the speaker cables and then connect the plugs to the terminals.
o Keep the caps tightened when in use.
o Carefully read the instructions for the banana plugs that you are using.
Notice about the European model
In accordance with European safety regulations, connecting banana plugs to speaker terminals is
not allowed on European models. The holes into which banana plugs could be inserted have been
covered with black caps. Connect speakers using bare wires or spade lugs. If a black cap should
become separated from its terminal, return it to its original position.
13