Ghibli & Wirbel RACER R 85 FD 65 Manual De Uso Y Mantenimiento página 40

(41) Display
- See the specific chapter.
(42) "Ready to go" button
- Pressing the button (42) on the display,
the icon " " shows up and the follow-
ing functions are started according to a
standard setting:
• Lowering of the brushes deck and rota-
tion of the brushes.
• Lowering of the squeegee and starting
of the suction device.
• Work speed = 3^ notch (3,6 km/h).
• Water flow = 3^ notch.
• Chemical agent = 3^ notch (1%).
• Suction = normal (100%).
• Brushes pressure = normal.
- With this standard function activated it is
possible to press any work button for any
modification or adjustment.
If necessary, when a modification is set in the
work functions, it is possible to save it acting
as indicated below:
- Press and keep pressed the button (42)
for 3 seconds; the saving confirmation is
indicated on the display (41) by the flash-
ing of "UPLOADED".
- To deactivate the new setting and return
to the standard setting values, press
again and keep pressed the button (42)
for 3 seconds; the confirmation is indicat-
ed on the display (41) by the flashing of
"RESET".
(43) ECO button
- When pressing the button (43) on the
display in the work phase, the icon "
shows up, the parameters of water, chem-
ical agent, suction and holder pressure
assume the following values:
• Water flow = 3^ notch.
• Chemical agent = 3^ notch (1%).
• Suction = silent (50%).
• Brushes pressure on the floor = nor-
mal.
(44) Suction button
- Pressing the button (44) the suction de-
vice turns on and the icon "
on the display and, if the forward gear is
engaged or if the machine is in neutral,
the squeegee lowers.
- Press the button (44) again and the suc-
tion will stop and the squeegee lifts.
- If the machine is still, the squeegee is low-
ered and the key (29) is on "ON" after a
certain period of inactivity the squeegee
will automatically lift.
(45) Silent operation button
- Pressing the button (45) reduces the
speed of the suction turbine, significantly
reducing the noise emitted by the ma-
chine; with the function enabled, the "
icon appears on the display.
- Pressing the button (45) again disables
the function and the machine resumes op-
erating in standard mode, the "
turns off and the "
the display.
NOTE:
When turning off the aspiration turbine with
"silent operation" mode enabled, the opera-
tion of the turbine will automatically switch
to "standard operation" mode for the entire
shut-off delay time.
(46) Brushes button
- Pressing the button (46), the brushes
deck lowers and the icon "
"
on the display.
- The brushes start rotating when the accel-
erator pedal is pressed, they stop when
the accelerator pedal is raised.
ENGLISH - 8
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
" shows up
" icon appears on
" shows up
" icon