Tv Tuner; Watching The Tv Tuner; Storing And Recalling Broadcast Stations - Pioneer DEH-P8600MP Manual De Instrucciones

Section
10

TV tuner

Watching the TV tuner

You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuners operation manuals. This section
provides information on TV operations with
this unit which differs from that described in
the TV tuners operation manual.
1 Preset number indicator
Shows which preset has been selected.
2 Band indicator
Shows which band the TV tuner is tuned to.
3 Channel indicator
Shows which channel the TV tuner is tuned.
1 Press SOURCE to select the TV.
Press SOURCE until you see Television dis-
played.
2 Press BAND/ESC to select a band.
Press BAND/ESC until the desired band is dis-
played, TV1 or TV2.
3 To perform manual tuning, push
MULTI-CONTROL left or right.
The channels move up or down step by step.
48
En
4 To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
1 2
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
3
right you can skip broadcasting channels. Seek
tuning starts as soon as you release
MULTI-CONTROL.
Storing and recalling
broadcast stations
If you press any of the preset tuning buttons
16 you can easily store up to six broadcast
stations for later recall with the touch of a but-
ton.
% When you find a station that you want
to store in memory press one of preset tun-
ing buttons 16 and hold until the preset
number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.
Notes
! Up to 12 stations, six for each of two TV bands
can be stored in memory.
! You can recall preset channels P01P12 by
pushing MULTI-CONTROL up or down.
! You can also store the station in memory by
using the preset channel list. (Refer to Select-
ing stations from the preset channel list on the
next page.)