TRAPP MB 51E Manual De Instrucciones página 53

Ocultar thumbs Ver también para MB 51E:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Check the cutting blades for:
The use of TRAPP original blades.
The correct sharpening of the cutting area
and for optimum balance.
Proper assembly.
Equipment repairs must only be made by
qualified professionals. Only use TRAPP
original parts. Always use the services of
TRAPP Authorized Technical Assistants.
To change the oil, do as described in the
figures below:
To Turn the Gasoline Mower On/Off
Ensure that there is oil in the crakcase and that it
is at the correct level.
Check whether there is fuel in the tank.
Use common gasoline only (do not use
gasoline with additives).
Press the fuel injector (11) there times (it
is not necessary if the engine is already
warm).
Hold the retractable lever of the brake
(10) firmly together with the cable.
Carefully pull the retractable start
rope (4) until you find some
resistance, then pull it all the way
Tilt the lawn mower
Remove the oil plug
through. Repeat this operation until
the motor starts.
Allow the motor to heat up for some
minutes.
Operate the accelerator lever (9) and
start mowing.
In order to turn the engine off, just release
the retractable brake handle (10).
Note:
Average consumption may vary
according to the demand of the work
and to the operator.
51
ENGLISH
Tabla de contenido
loading

Tabla de contenido