Electromagnetic Compatibility (Emc); Icons; Tool Assembly; Changing/Installing Batteries - RIDGID Micro CA-300 Manual Del Usuario

• Reorient or relocate the receiving antenna.
• I ncrease the separation between the quip-
ment and receiver.
• C onsult the dealer or an experienced radio/
TV technician for help.
Electromagnetic
Compatibility (EMC)
The term electromagnetic compatibility is
taken to mean the capability of the prod-
uct to function smoothly in an environment
where electromagnetic radiation and elec-
trostatic discharges are present and without
causing electromagnet interference to other
equipment.
The RIDGID micro CA-300 Inspect-
NOTICE
ion Camera conforms to all applicable EMC
standards. However, the possibility of it caus-
ing interference in other devices cannot be
precluded.

Icons

Battery Life Indicator – Fully
charged battery.
Battery Life Indicator – Less than
25% of battery charge remains.
SD™ Card – Indicates an SD card
has been inserted into the device.
Still Camera – Indicates device is
operating in still camera mode.
Video Camera – Indicates device is
operating in video camera mode.
Playback Mode – Pressing select
on this icon allows you to view and
delete previously saved images and
video.
Menu – Push select on this icon to
be taken to the menu screen.
Select – Pressing select from the
live screen will take you to the
primary settings screen.
Automatic Power Off – Device will
automatically shut down after 5, 15
or 60 minutes of inactivity.
About – Displays software version.
Time and Date – Enter this screen
to set time and date.
micro CA-300 Inspection Camera
Factory Reset – Restore factory
defaults.
Language – Choose between,
English, French, Spanish, German,
Dutch, Italian, etc.
Save – Indicates image or video
has been saved to memory.
Speaker – Keep the speaker on or
off during video playback.
Trash – Delete confirmation icon.
TV – Chose between NTSC and PAL
to enable TV out video format.
LED Brightness – Press right & left
arrows to change the LED bright-
ness.
Zoom – Press up & down arrows to
change the zoom from 1.0x to 3.5x

Tool Assembly

WARNING
To reduce the risk of serious injury during
use, follow these procedures for proper as‑
sembly.

Changing/Installing Batteries

The micro CA-300 is supplied without the
battery installed. If the battery indicator dis-
plays , the battery needs to be recharged.
Re move the battery prior to long term stor-
age to avoid battery leakage.
1. Squeeze the battery clips (See Figure 5)
and pull to remove battery compart-
ment cover. If needed, slide battery out.
Figure 5 - Battery Compartment Cover
7