Risk Of Fire - Silvercrest SHLF 2000 C1 Manual De Instrucciones E Indicaciones De Seguridad

SilverCrest SHLF 2000 C1

Risk of fire!

 Always place the fan heater on an even, heat-resistant
surface away from heat sources and combustible materials,
liquids or gases. Leave clearance of at least 1 m on all sides.
 The fan heater is not designed to be operated with an
external timer or a separate remote control system.
 Always unwind all the power cable (9).
 The fan heater must not be covered and no objects must be
inserted into the air inlet grille (6) or the air outlet grille (2) to
avoid overheating.
 In order to avoid a build-up of heat, the air needs to be able
to go in and out freely.
 When the device is in use, burnable objects such as curtains
or paper should be kept away from the fan heater.
 Make sure that no fire hazards (e.g. burning candles) are
placed on or near the fan heater.
Risk of getting burnt!
 The surfaces of the fan heater can get very hot when in use.
Only hold the device by the handle (5).
 The fan heater can still be very hot even after it has been
switched off.
 Always allow the fan heater to cool before cleaning.
 Only transport the fan heater when it has cooled down.
Always carry it by the handle (5).
66 - English