Technical Data - Würth WGL 1 Manual Del Usuario

Non-stationary workplace lamp
Lamp luminous flux
Luminous flux of illuminant
Operating voltage
Capacity rating
Degree of protection
Protection class
Impact resistance
Housing
Cable
Cable length
Earthed power outlet or shaped solid rubber plug
Operating temperature
Dimensions (H x W x D)
Weight approx.
Φ
40,000 lm
Note
The clearance on all sides must be at least 500 mm.
Control elements
(See Fig. I)
1 Carrying handle
2 Pin support
3 Quick-release lock
4 Lens
5 Clip
Matching of the lamp to the lighting
situation
You can adapt the WGL 1 to match your individual
lighting situation. The front cover panels are avail-
able for this purpose.
a) With front cover panel
• To illuminate a close-up area.
b) Without front cover panel
• For better illumination at a distance.
8
All manuals and user guides at all-guides.com

Technical data

EEK EEK
LED
A++ A++
Item 0981 180 841
40,000 lm
45,000 lm
100 - 240 V, 50/60 Hz
280 W
IP65
I
IK10
Impact and break-proof
Oilflex 540 P yellow
®
10 m (5 m 3G1.5 mm , 3 m 7G0.75 mm
2
16 A/250 V∼
- 40°C to + 59°C
228 x 446 x 446 mm
10,000 g
CRI
70
Operation
(see fig. II)
Bring the strain relief into the correct position
■
before installing the change bolt.
Direct lighting – light emission
DOWNWARDS
Push the change bolt DOWNWARDS into the
■
lamp.
Make sure that the latching bolt of the quick-re-
■
lease fastener [3] latches into the position
provided for it.
Indirect lighting – light emission
UPWARDS
Push the change bolt UPWARDS into the lamp.
■
Make sure that the latching bolt of the quick-re-
■
lease fastener [3] latches into the position
provided for it.
Installation for operation with a tripod /
mast system.
Connect the lamp with the pin support to the
■
tripod/mast.
Lock the lamp using the star knob.
■
)
2
CCT
5000K