Warranty Disclaimer - Hama Color EWS-1400 Instrucciones De Uso

Display
6.4. Maximum and minimum temperature and
humidity values
• The base station automatically stores the maximum
and minimum outdoor/indoor temperature and
humidity values.
• Repeatedly press the + button (18) to switch
between the current temperature and humidity,
minimum temperature and humidity (MIN) and
maximum temperature and humidity (MAX).
• Press and hold the + button (18) for approx.
3 seconds to reset the stored maximum and
minimum values.
6.5. Backlight
• Press the SNOOZE/LIGHT button (22) to light up
the display for approx. 5 seconds.
• Press the SNOOZE/LIGHT button (22) again to
light up the display steadily.
Note – Permanent backlight mode
Permanent backlight mode is only possible when
the base station is plugged into mains power.
• Press the SNOOZE/LIGHT button (22) while
the display is permanently backlit to turn off the
backlight
8
All manuals and user guides at all-guides.com
Trend
Increasing
Constant
Decreasing
7. Care and Maintenance
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
Make sure that water does not get into the product.

8. Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
9. Service and Support
Please contact Hama Product Consulting if you have
any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com