Heating Temperature Adjustment - Ferroli MACH Instrucciones De Uso

Heating temperature adjustment

Access the "Adjustment Temp" menu to vary the
temperature from a minimum of 20 °C to a maximum
of 90 °C. Confirm with the OK button.
The boiler comes with the time
B
program not activated. Therefore,
if requested, this is the setpoint
value.
Heating temperature reduction
Access the "Reduction Adjustment Temp" menu to
vary the temperature from a minimum of 0°C to a
maximum of 50°. Confirm with the OK button.
This parameter is used only if time program-
A
ming is activated. See "Time programming"
on page 301
DHW temperature adjustment (with optional hot water tank installed)
Access the "Adjustment Temp" menu to vary the
temperature from a minimum of 10°C to a maximum of
65°C. Confirm with the OK button.
The boiler comes with the time
B
program not activated. Therefore,
if requested, this is the setpoint
value.
DHW temperature reduction (with optional hot water tank installed)
Access the "Reduction Adjustment Temp" menu to
vary the temperature from a minimum of 0°C to a
maximum of 50°C. Confirm with the OK button.
This parameter is used only if time program-
A
ming is activated. See "Time programming"
on page 301
300
fig. 14
fig. 15
cod. 3541V120 - Rev 00 - 09/2021
CH setpoint
80
to confirm
CH setpoint reduction
35
to confirm
CH setpoint
65
to confirm
fig. 16
DHW setpoint reduction
25
to confirm
fig. 17
MACH
EN