Before You Begin; Tools And Parts Needed; Parts Included; Power Requirements - Gaggenau BO 450 612 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Before you begin

T ools and parts needed
B e f o r e y o u b e g i n
Philips head screwdriver
1/8" drill bit and drill
Measuring tape

Parts included

Built-in oven
3 Torx screws

Power Requirements

The outlet must be properly grounded in accordance with
all applicable codes.

Planning notes

Door hinge not interchangeable.
Distance from furniture body to door front 1.85" (47 mm).
Distance from furniture body to outer edge of door
handle 3.7" (94 mm) after retrofitting the handle (special
accessory).
Pay attention to the front protrusion, possibly including
the door handle, for opening drawers at the sides.
When planning a corner solution, pay attention to the
door opening angle of at least 90°.
All manuals and user guides at all-guides.com

Preparing Kitchen Units

P r e p a r i n g K i t c h e n U n i t s
195° F (90 °C) and adjoining furniture frontages up to
160° F (70 °C).
Ventilation cut-out in the built-in cupboard's intermediate
shelf: at least 0.8 in to 1.65 ft (20 x 500 mm).
The wall socket must be outside the built-in niche.
Cut recesses on the furniture before inserting the
appliance. Remove any shavings, as these can affect the
operation of electrical components.
Secure unsecured furniture items to the wall using a
commercially available bracket.
Only install the appliance so high that accessories can
be removed with ease.
K itchen units must be temperature-resistant up to
en-us
Before you begin
5
Tabla de contenido
loading

Este manual también es adecuado para:

Bo 451 612Bo 480 613Bo 481 613Bx 480 612Bx 481 612

Tabla de contenido