Description Of The Symbols - PROTEOR DYNASTAR Instrucciones De Uso

7. DETECTING ANY MALFUNCTIONING
If you notice that the device is behaving abnormally or if its characteristics feel different, or if it has been badly knocked, consult your
prosthetist/orthotist.
8. WARNINGS, CONTRAINDICATIONS, SIDE EFFECTS
A. Warnings
Using the foot in a way that goes against the advice given by your prosthetist/orthotist may damage or degrade the foot's components
(e.g. carrying heavy loads, excessive stresses, use after its service life has expired, etc.)
The device is weatherproof only.
B. Contraindications
This foot is not intended to be used for activities associated with a risk of significant impact or excessive loading.
This foot is not resistant to fresh water, salt water or chlorinated water.
C. Side effects
There are no side effects directly associated with the device.
Any serious incident that occurs which relates to the device must be reported to the manufacturer and to the competent authority
of the member state in which the incident occurred.
9. MAINTENANCE, STORAGE, DISPOSAL AND SERVICE LIFE
A. Maintenance/cleaning
Clean the foot shell with a damp cloth or sponge.
All work on the foot should be performed by the prosthetist/orthotist; no other operations, such as lubrication, work on the
fastenings or other work, need to be performed.
After accidental contact with water:
•
Rinse the foot with clean water
•
Dry thoroughly
The foot shell, sock and malleolar clip are the only components of the foot which may need to be replaced (in the event of wear, loss, etc.).
Foot shell:
•
Use a shoehorn to remove and refit the foot shell.
•
Only use spare parts kit 1A60020-XYY (X: Side/YY: Size (cm)) including foot shell, sock and malleolar clip.
B. Storage
Service and storage temperature: -20°C to +60°C
Relative humidity of the air: no restrictions
C. Disposal
The various components of the foot are considered as special waste: stainless steel, aluminium, carbon fibre, epoxy resin,
thermoplastic, polyurethane. They must be treated in accordance with current, applicable legislation.
D. Service life
It is advisable to arrange for a prosthetist/orthotist to check the product once a year.

10. DESCRIPTION OF THE SYMBOLS

Manufacturer
INSTRUCTIONS FOR USE
Identified risk
CE marking and year of first declaration of
conformity
Page 3 of 4